early 2 blt block, deck plate honed .040",sq. decked, sealedpower hyper/coated pistons (8;9w76cc heads)moly rings, scat crank/rods, balancer & sfi flywheel, balanced & assembled, all parts "new". less cam/pump/pan/t.cover. can also supply/machine components to finish to complete engine.

396 bored to 402 11.5 comp.hydr.cam, all new,balanced,can be heard running, small port,unleaded seats.ALSO 396 bored to 427 open chamber square port heads needs assembly and rings and bearings...phone only ask for Jim

1998 chev. 350 short block, incomplete .030 over, zero decked. Brand new chev. ZZ4 cam and new hydraulic roller lifters and spider retainer, 4 new and 4 used Wiseco forged pistons, 8 factory powdered metal connecting rods, need to be resized, NO piston rings or bearings. Nodular crank turned .010/.010. Lost interest, would really like to just get rid of it. Have pics, can send on request.

I have a all new 509 BBC ALL aftermarkt parts Dart BIG M block Brodex heads BB3X CNC Scat crank 4340 Solid roller 4 7 swap Cal for more detail will trade let me know what you have. PS not desperate to sell or trade so be real with offers.

400 cu.in, Bowtie Block, NASCAR heads 42 cc 15 degree built by Jim Bell,titanium valves, jessel shaft rockers,jessel lifters, jessel belt drive,je pistons 15-1 4.125, Manley 6" super 70 aluminum rods, Cola crank 3 3/4 stroke,electric water pump, crank trigger and msd dist. barry grant carb. Ran 9.50 in 2500 lb car. $7500 250-317-1204

515 CI big block ford, A460 block, A460 heads, aluminum rods, SV1 1400 cfm carb etc......only 6 full passes on motor!! Can be ran N/A or sprayed....with small 800 lift cam it runs 8's N/A over 3000 lbs!!! Currently in foxbody...selling complete with motor plates/stainless headers. Email for complete list of parts!!!

Selling complete or will separate. The bottom end is a 436 CI SBC with the following parts-Little M block, Callies 4 inch stroke crank, oliver 6 inch rods, custom 14:1 diamond pistons,Jesel belt drive, Moroso oil pan, felpro one piece pan gasket, melling select oil pump, bullet roller cam and lifters. The top end consists of ALL Pro 245 aluminium raised runner heads, titanium intake valves and stainless exhaust valves, manley nex tek valve springs with titanium retainers, jesel shaft mount rocker system with spares, trend pushrods, moroso sheetmetal valve covers and choice of tunnelram dual quad or dominator style single plane manifold. All reasonable offers or partial trades considered. Asking $5800 for the short block, $ 4000 for the top end or $9000 complete. This engine is all together

8 eagle bushed i beam rods plus new bearings $140 new 7/16 stud girdle $90 MSD soft touch rev control with a 7000 chip $40

Have a 350 4 bolt block that is untouched. Still in its 4" bore and no cracks. A good base for a build. It is out of 1985 truck. Thankyou

I have a good used 350 vortec long block assembly that I will not be using.Changed plans with my car and now going LS1 so I cant use this setup.

Good used LT1 Centreforce clutch assembly that I was going to use but ended up going with a LSI drivetrain so cant use this set up.

I have a set of brand new crower self aligning 1.6 roller rockers available.Going LS1 so cant use these.Will fit any centre hold down chevy heads.Part number as per Summits site 73603-16 (set of 16) http://www.summitracing.com/parts/CRO-73603-16/

I have a brand new bowtie vortec specific intake available.Going LS1 so cant use this. I only placed it on the engine for mock up but never ran the engine.This is the actual intake.I will post my own pic soon. http://www.summitracing.com/parts/NAL-12496822/

I have a brand new in the box MSD complete billet distributor available.Going LS1 so I cant use this.Part #8570 chevy V8 small cap.New on Summits web site is 250 plus shipping customs and duties..... do the math.This one is already here and ready to go.

I have a brand new GM LT1 6 spd flywheel available.Will fit 93-97 camaros and firebirds.

freshly machined 351w roller block. .030 over,,linebored,decked,,ready to go. 900$ or best offer.

Small jornal x 5.7" SBC scat h beam rods...."new"

-complete engine renwal -scat steel forged crnak , rods, new -JE 12.5 pistons -complete balanced rotating assembly -new clevite rods and mains -all new gaskets -big brodie heads rebuilt new gudes vale job , titanium in and out valves -jesel rockers -comp cam push rods new -valve springs and cam for alterd tyle car , 7800 rpm -tunnel ram with 660 carbs rebuilt -avalable with 1050 and single intake ( intake has to be matched to ports ) -dry sump , new tank c/w heater , new filters , new lines , freshened pump 2 scavangers and one pump - new dist. , new wires , used starter, new flywheel. - can email the build sheet

KIT "INCLUDES.....EAGLE 3.40" "STROKER" Crank...FORGED 5140 STEEL "I-BEAM" Connecting RODS....KEITH BLACK Flat Top "HYPERUTECTIC" PISTONS & MOLY RINGS...This KIT is "BALANCED" & INCLUDES Heavy Duty Harmonic BALANCER & FLEXPLATE.....ALL components are "NEW" & TOP QUALITY...$1099.99...Brant Performance..Your HI-PERF ENGINE PARTS SUPPLIER...Thanks.

Kit by EAGLE to fit 350 chev 2 pc seal blocks...INCLUDES FORGED 4340 STEEL "NITRATED" 3.500" LITE-WEIGHT STROKER Crank...FORGED 4340 STEEL "H-BEAM" LITE-WEIGHT 6.0" Rods with ARP Bolts...MAHLE Flat Top 10.5-1 FORGED 4.030 bore Pistons that are "THERMAL COATED"...This kit is "INTERNALLY BALANCED"....ALL Components are BRAND "NEW"..TOP QUALITY...$1299.99 or Will Sell CRANK & RODS Together as a SET for $999.99...Brant Performance...Your Hi-PERF ENGINE PARTS SUPPLIER !...Thanks.

KIT is by EAGLE & INCLUDES...FORGED "SRP" 9.8-1 Compression STD 4.00" Bore Pistons with MOLY RINGS...FORGED 5140 STEEL "I-BEAM" 6.0" Long Connecting RODS with ARP Bolts...cast/Steel Heavy Duty 3.750" STROKER CRANK...This kit is INTERNALLY BALANCED"...Ready for Assembly with your STD bore 350 Block.... ALL Parts are BRAND "NEW"...TOP QUALITY.... "NO"..will "NOT" SEPARATE & will "NOT" substitute any Parts !....Brant Performance...your Hi-PERF ENGINE PARTS SUPPLIER !...Picture is for illustration only..Thanks.

SCAT cast 454ci crank, KB #203 .030" pistons. 9:1w118cc heads. both items NEW.

SVO A4 block, front lifter bores bushed, currently bored to 4.065 $1500 Edelbrock Victor Race cylinder heads, ported, polished, Ti valves, $3500 Edelbrock Super Victor Intake with end spacers to fit Victor heads $300 Custom headers 2" primaries $500 Manley aluminum rods "Super 70" $1300 brand new Eagle forged 347 crank, rods and Ross 16:1 pistons needs two steel h-beams rods and cut crank .010" plus balance to fix $1500 Cam Motion steel solid roller 286*I, 253*E, .728" lift with a 1.6 rocker $400 Comp Cams solid lifters $300 T&D machine shaft mount rocker system for Victor heads $1000 SVO 28oz. harmonic balancer $200

ENGINE: 352" sbf Ford based on 347 stroker, ran 9.60 range N/A. A4 block, eagle forged rotating, cam motion solid roller cam, ported Victor heads, T&D machine rockers, super victor intake, canton pan, csr waterpump, and more... needs crank cut .010" and two new h beam rods. Have a brand new set of Manley super 70 aluminum rods as well. Will part out of sell complete.

completely fresh 454 chev big block engine, completly rebuilt , comes carb to pan, instalation available, call for details, 226 663 1234 london,